Q: When I turn on the robot, it has no response. Why?
1. Low voltage: Please recharge all batteries or replace with new ones.
2. Batteries installed in incorrect polarity (+/-).
3. Incorrect wiring on the battery holder or motor.
Q: When I controlled the robot to move forward, it moved backwards. How can I fix this?
The wiring of the motor is connected in reverse. Please disconnect and reconnect them correctly.
Q: How to program my robot or restore the factory settings?
Please download the companion coding software on the official website, connect the robot to your PC via a USB cable, select the serial port and main-board type in the software to start coding. You can use "Restore Firmware" options for live testing or restoring factory programs.
Q: I cannot connect the robot to a computer via USB or wireless. How can I fix it?
Your computer may not have the mainboard driver installed. Please install the driver from the coding software's "Help" menu, restart the robot, and attempt connection again.
Q: Why does the Line-following Sensor not work?
1. Ensure the distance between the line-following sensor and map is between 1-2cm (optimal working range).
2. Do not use line-following mode under strong light source, as it interferes with sensor function.
3. Make sure to use non-reflective material to print or construct your line map.
Q: Why cannot the software read the sensor values?
Please inspect the wiring setup. Make sure the physical sensors are connected to the exact corresponding ports set in your programming software.
Briy Toys
